METRON QA-1290, Руководство пользователя и обслуживания, Страница: 20 / 65

•
This line shows the FIRMWARE version currently installed
in the QA-1290. No selection.
•
Press GO BACK (F2) to advance to Setup Screen 1.
Setup Screen 4. Shown below allows the user to select different
units of pressure measurement for Manometer,Leak and Overpressure
testing only.
mmHg, cmH20, inH20, PSI, kPa, mBar
Pressure unit:mmHg ....................> F7
F6
F5
GO BACK MAIN MENU
F1 F2 F3 F4
3.6 Printing Results
A printed report may be prepared at the completion of testing. In each
test results screen that shows the digital readout you can select
PRINT (F5) . The Print Screen appears.
Print Test Header .....................> F7
Print Test Footer .....................> F6
Form Feed .............................> F5
GO BACK MAIN MENU
F1 F2 F3 F4
•
Print Test Header (F7) . Selecting this prepares a Report Header
for printing . The header contains identifying information relative
to the facility and operator, the device under test, and QA-1290’s
setup configuration for the test.
•
Print Test Footer (F6) . Selecting this prepares a Report Footer
for printing . The footer is used for operator comments and signa-
ture.
•
Form Feed (F5). Pressing this advances the page, currently be-
ing printed, in the printer.
•
Press GO BACK (F2) to return to Test Screen.
•
Press MAIN MENU (F4) to return to Main Menu Screen 1.
3-6