￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1 Introduction
IC equipment: Inline Ultrafiltration 2 - push mode
￭￭￭￭￭￭￭￭
1
1 Introduction
1.1
Description of the IC equipment: Inline Ultrafiltra-
tion 2 - push mode
The IC equipment: Inline Ultrafiltration 2 - push mode (6.05330.110) con-
tains all accessories required for Inline Ultrafiltration directly before injec-
tion.
The main component of the IC equipment: Inline Ultrafiltration 2 - push
mode is the ultrafiltration cell. This cell is suitable for the filtration of sam-
ples with high requirements regarding filtration effectiveness and sample
throughput.
2 peristaltic pumps are needed in addition to the IC equipment: Inline
Ultrafiltration 2 - push mode for pumping the sample and the filtrate.
1.2
About the documentation
This manual describes the correct assembly and maintenance of the IC
equipment: Inline Ultrafiltration 2 - push mode, the installation of the
capillary connections and the assembly of the holder to the sample
changer.
The installation of the peristaltic pump is not described in this manual. The
installation of the peristaltic pump is described in the respective manuals
for the ion chromatograph or for the sample changer.
CAUTION
Please read through this documentation carefully before putting the IC
equipment: Inline Ultrafiltration 2 - push mode into operation. The doc-
umentation contains information and warnings which the user must
follow in order to ensure safe operation of the IC equipment: Inline
Ultrafiltration 2 - push mode.
