MI 3321 MultiservicerXA
Autotest sequences
85
When searching for stored autotest results the following filters can be used to narrow
the hits:
- Device number,
- User,
- Test site,
- Location,
- Date from and date to.
Keys:
/
Select filter line.
/
,
Alphanumeric
Edits selected filter.
FIND
(F1)
Starts search after filters are set correctly.
UNDO
(F2)
Undo latest change.
TYPE
(F3)
Selects parameter line type.
ESC
Returns to Main menu.
Notes:
To change the selected parameter line type, press the TYPE (F3) key and the
»parameter type« will become highlighted (e.g. DUT). The keys
and
can then
be used to change the parameter type and by pressing ENTER key the choice can
be confirmed. Once the parameter types have been set up, the data required to
filter the files can be inserted. Filter information can be inserted via the
alphanumeric keypad or, in some filter fields such as user, can also be selected
from a predefined list by pressing the LIST (F4) key. The DUT number field can
also be read using a barcode reader.
By placing a »*« (shift + “2”) in a particular field, tells the instrument not to search
the associated filter field. When searching, the instrument will therefore ignore data
in this parameter and go on to find all the DUTs that conform to data placed in the
other filter fields.
To find all stored results, enter »*« in the all fields (excluding DATE where the
correct from and to dates must be entered).
If the search filters are set up correctly and the DUTs exist in the units memory, the
Project autotests result menu
will be displayed.
While recalling stored results, the instrument shows a bar graph and a ratio of files
found compared to files stored in memory (e.g. 7/11 implies 7 results have been found
to meet the filter criteria out of a potential 11 results stored in the flash memory).
Project autotest result menu
