Multi LAN 350
Operation
24
amplitude
re
s
u
lt
c
u
rv
e
w
o
rs
t
re
s
u
lt
lo
w
e
s
t
m
a
rg
in
frequency
limit curve
Example for worst
result and margin
Wire Map
All connections, including shield (if present) are shown.
Length
Cable length and test limit are shown.
Propagation Delay, Delay Skew, Resistance, Impedance
Results and test limit (if applied) are shown.
5.2.2 PASS / FAIL decistions
Individual PASS / FAIL
Each result is equipped with a Pass/Fail judgement that applies to a limit, limit curve or
connectivity defined in the selected test standard. The worst result from all pairs or pair
combinations (worst margin or worst result) is marked with a bullet in front of the result.
Overall PASS / FAIL in Single Test
Each Single Test is equipped with an overall Pass/Fail judgement (the marked result is
considered for it).
Overall PASS / FAIL and Headroom in Autotest
At the end of Autotest an overall Pass/Fail (if all tests passed) result and Headroom are
shown on the display. Headroom is the worst case margin in the NEXT test that can be
used as a measure of the installation's condition when doing periodic inspections.
PASS /FAIL marked with an asterisk
When the measured results are close to the given test limit the accuracy of the
instrument could lead to an irregular Pass/Fail judgment. Such Pass/Fail warnings are
marked with an asterisk. In general it is recommended to treat such test results as
failed.
