METREL Instaltest 61557 MI 2087, Инструкция по эксплуатации

Страница: 57 / 68

MI 2087 Instaltest 61557 Memory and other operations
56
4.2. Recalling of stored results
Stored results can be displayed whenever needed for visual check. Main result,
potential subresults and potential function parameters as well as function identification
number can be recalled.
How to recall stored results?
If there is no stored result at all,
no message will be displayed for a while, after
pressing RCL key.
If there is no stored result under set FUSE / FUSE CABINET code,
no message will
blink, whenever the code is changed.
Organisation of memory locations, under a certain FUSE / FUSE CABINET code, is
presented on the figure below.
FUSE location will be offered (blinking). Function identification
number of last result, stored under offered FUSE/FUSE CABINET
code, will be displayed.
Set FUSE code (001 up to 999 can be set).
FUSE CABINET code will be offered (blinking).
Set FUSE CABINET code (001 up to 999 can be set).
FUSE CABINET code will stop blinking.
Check main result, subresults and function parameters, hidden
behind displayed Function identification number.
Move to other test results, stored under the same FUSE / FUSE
CABINET code using the
↑
and
↓
keys.
Check main result, subresults and function parameters, hidden
behind displayed Function identification number.
Repeat the whole procedure, to recall results, stored under other
FUSE / FUSE CABINET codes.