manualshive.com logo in svg

Metra Electronics 99-7431, Руководство по установке, Страница: 5 / 16

Поделиться
Скачать
Metra Electronics 99-7431 Скачать руководство пользователя страница 5

99-7431

5

Dash Disassembly

(Figure B)

(Figure A)

Mercury Villager 1996-1998
Nissan Quest 1996-1998
1.

  Remove (4) plastic screws from the base of the storage compartment, 

then pop out the (4) anchor clips securing the screws and remove the 

compartment.  (Figure A)

2.

  Remove (2) Phillips screws from the base of the radio trim bezel and 

then remove (2) Phillips screws above the radio opening.

3.

  Remove the ashtray and then pull up and out on the radio trim bezel 

and remove the bezel.

4.

  Remove (4) Phillips screws securing the factory radio housing and 

remove the housing and disconnect the wiring.

5.

  Remove (2) Phillips screws securing the factory radio to the housing 

and remove the radio.

6.

 

If installing a double DIN aftermarket radio:

 Remove the factory 

brackets from the radio. Retain the brackets for use during kit 

assembly.

7.

 

If installing a single DIN aftermarket radio:

 Cut and remove all 

mounting tabs on Bracket Set #2 EXCEPT tabs “D”. (The tabs can be 

identified by the stamped letter by each tab).  (Figure B)

 

If installing a single DIN aftermarket radio, continue to Kit Preparation.

 

If installing a double DIN aftermarket radio, continue to Kit Assembly.

"D"

"D"

"D"

"D"

Single DIN

Only

Содержание 99-7431

















Отзывы:

Нет отзывов