Metra Electronics 99-7431 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 16

Metra Electronics 99-7431 Скачать руководство пользователя страница 16

METRA. The World’s best kits.

™

metraonline.com

© COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION

REV

. 5/16/2016 INST99-7431

K

NOWLEDGE IS

P

OWER

E

nhance your installation and fabrication skills by

enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.

Metra recommends MECP
certified technicians

Installation instructions for part 99-7431

IMPORTANT

If you are having difficulties with the
installation of this product, please call our
Tech Support line at

1-800-253-TECH

.

Before doing so, look over the instructions a
second time, and make sure the installation
was performed exactly as the instructions
are stated. Please have the vehicle apart
and ready to perform troubleshooting steps
before calling.

1.

Locate the factory wiring

harness and antenna

connector in the dash and

complete all necessary

connections to the radio.

Metra recommends using

the proper mating adapter

from Metra and/or AXXESS.

Test the radio for proper

operation.

For the Nissan Maxima

1995-1999 /

Infiniti I-30 1996-1999:

1.

Mount the completed

assembly to the factory

trim bezel and factory

bracket assembly using

the factory screws.

(Figure A)

2.

Mount to the sub-dash

using the factory screws,

and then reassemble the

dash in reverse order of

disassembly.

For the Nissan Maxima

(without wrap around

radio) 2000-2003:

1.

Mount the completed

assembly to the factory

bracket assembly using

the (4) Phillips flat-head

screws supplied.

2.

Mount to the sub-dash

using the factory screws,

and then reassemble the

dash in reverse order of

disassembly.

For the Nissan 240SX 1995-1998:

1.

Mount the completed

assembly to the factory

trim bezel (via tabs “B”)

using the factory screws.

2.

Mount to the sub-dash (via

tabs “C”) using the factory

screws, and then reassemble

the dash in reverse order of

disassembly.

For all other applications:
1.

Reassemble the dash in

reverse order of disassembly.

Final Assembly

(Figure A)

«
...
14
15
16

Содержание 99-7431

















Отзывы:

Нет отзывов