manualshive.com logo in svg

Metra Electronics 99-7431, Руководство по установке, Страница: 14 / 16

Поделиться
Скачать
Metra Electronics 99-7431 Скачать руководство пользователя страница 14

99-7431

(Figure A)

(Figure A)

Kit Preparation

Altima, Frontier, Pathfinder, Quest, 

Villager, Xterra:

1.

  Cut and remove all the mounting 

tabs from the 

radio housing

.

2.

  Secure the appropriate bracket 

to the 

radio housing

 using the (4) 

Phillips flat head screws provided.  

(Figure A)

 

Continue to kit assembly

200SX, Sentra:
1.

  Cut and remove all the mounting 

tabs from the 

radio housing

.

2.

  Secure the right bracket to the 

radio housing

 using the (2) Phillips 

flat head screws provided.  (Figure 

A)

3.

  Secure the right bracket to the 

factory cupholder using the (1) 

factory screw and (1) locating pin.  

(Figure A)

4.

  Secure the left bracket to the 

radio 

housing

 using the (2) Phillips flat 

head screws provided.  (Figure A)

5.

  Secure the left bracket to the 

factory cupholder using the (1) 

factory screw and (1) locating pin.  

(Figure A)

 

Continue to kit assembly

14

Содержание 99-7431

















Отзывы:

Нет отзывов