99-7431
(Figure A)
(Figure A)
PA TENT
PENDING
PA TENT
PENDING
DIN radio provision with pocket
1.
Remove the metal DIN sleeve
from the aftermarket radio.
2.
Slide the sleeve into the
radio
housing
and secure by bending
the metal locking tabs down.
(Figure A)
3.
Slide the radio back into the
sleeve until it clicks in. (Figure A)
Continue to final assembly
ISO DIN radio provision with pocket
1.
Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
2.
Secure the
ISO DIN brackets
to the
radio using the screws supplied
with the radio. (Figure A)
3.
Slide the radio/bracket assembly
into the
radio housing
until the
side clips engage. (Figure A)
4.
Attach the
ISO DIN trim ring
over
the radio. (Figure A)
Continue to final assembly
Kit Assembly
15
(Figure A)
(Figure B)
ISO DDIN radio provision
1.
Slide the
ISO DDIN brackets
into
the
ISO DDIN trim plate
aligning
the holes in the trim plate to the
clips on the bracket. (Figure A)
2.
Attach the factory mounting
brackets and the
ISO DDIN trim
plate
/bracket assembly to the radio
with the screws supplied with the
radio. (Figure B)
3.
Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections
to the radio. Metra recommends
using the proper mating adapter from
Metra and/or AXXESS. Test the radio
for proper operation.
4.
Reassemble the dash in reverse
order of disassembly.