99-7431
11
Dash Disassembly
Nissan Frontier 2002-2004
Nissan Xterra 2002-2004
1.
Unclip the gear shifter trim bezel and remove.
2.
Remove (2) Phillips screws exposed in the shifter cavity.
3.
Remove (2) Phillips screws under the climate control cluster and then
unclip the radio trim bezel and remove. (Figure A)
4.
Remove (4) Phillips screws securing the factory radio and disconnect the
wiring.
CAUTION:
Do not cycle the key when removing a dash with passenger
airbag on/off switch).
5.
If installing a single DIN aftermarket radio:
Cut Bracket Set #2 along the
scored lines removing the SHADED portions of the brackets. (Figure B)
6.
If installing a single DIN aftermarket radio:
Cut Bracket Set #2 along the
scored lines removing the SHADED portions of the brackets. (Figure B)
7.
If installing a single DIN aftermarket radio:
Cut and remove all mounting
tabs EXCEPT tabs “A” and “B”. (The tabs can be identified by the stamped
letter by each tab). (Figure B)
If installing a single DIN aftermarket radio, continue to Kit Preparation.
If installing a double DIN aftermarket radio, continue to Kit Assembly.
(Figure B)
(Figure A)
"A"
"A"
"B"
"B"
Single DIN
Only