manualshive.com logo in svg

Metra Electronics 99-7431, Руководство по установке, Страница: 10 / 16

Поделиться
Скачать
Metra Electronics 99-7431 Скачать руководство пользователя страница 10

99-7431

10

Dash Disassembly

Nissan Frontier 1998-2001
Nissan Xterra 2000-2001
1.

  Remove the ashtray and (2) Phillips screws 

exposed in the ashtray cavity and then unclip 

the radio trim bezel and remove.  (Figure A)

2.

  Remove (4) Phillips screws securing the 

factory radio and disconnect the wiring.

3.

 

If installing a double DIN aftermarket 

radio:

 Remove the factory brackets from the 

radio. Retain the brackets for use during kit 

assembly.

4.

 

If installing a single DIN aftermarket 

radio: 

Cut Bracket Set #2 along the scored 

lines removing the SHADED portions of the 

brackets.  (Figure B)

5.

 

If installing a single DIN aftermarket radio: 

Cut and remove all mounting tabs EXCEPT 

tabs “A” and “B”. (The tabs can be identified 

by the stamped letter by each tab).  (Figure B)

 

If installing a single DIN aftermarket radio, 

continue to Kit Preparation.

 

If installing a double DIN aftermarket radio, 

continue to Kit Assembly.

(Figure B)

(Figure A)

"A"

"A"

"B"

"B"

Single DIN

Only

Содержание 99-7431

















Отзывы:

Нет отзывов