1.
Remove (2) screws from the top of the radio
trim bezel.
2.
Pull out on the top edge of the bezel and lift up
to remove. (Figure A)
3.
Remove the hardware securing the factory
mounting brackets to the factory radio.
(Figure B)
4.
Remove and retain the brackets.
Cadillac Deville 1985-1995
Fleetwood 1985-1992
Cadillac Escalade, Escalade
EXT/Chevrolet Avalanche,
C-K Pickup, Silverado,
Suburban, Tahoe/GMC C-K
Pickup, Sierra, Suburban,
Yukon 1995-2002
Cadillac Eldorado/Seville
1984-1991
1.
Remove (2) Phillips screws above the A/C vents.
(Figure A)
2.
Pull out on the top edge of the dash trim bezel
unhook the bottom edge and remove.
3.
Remove the hardware securing the factory
mounting brackets to the factory radio.
(Figure B)
4.
Remove and retain the brackets.
1.
Remove the steering column filler panel and the
ashtray. (Figure A)
2.
Unclip the dash trim bezel and remove.
3.
Using a small flat-blade screwdriver, press
down on the outer clips of the factory radio
(or pocket).
4.
Disconnect the wiring and remove the radio.
Locate Bracket Set #8. (Figure B)
(Figure A)
(Figure B)
(S-10 application
shown as example)
(Figure A)
(Figure B)
(S-10 application
shown as example)
(Figure A)
(Figure B)
Dash Disassembly 99-4644
