ISO radio provision
Kit Assembly 99-4644
(Figure B)
(Figure A)
1.
Choose a faceplate (according to the desired installation depth) and snap it onto
the front of the radio housing and secure with (4) hex-head screws. (Figure A)
2.
Snap the ISO trimring into the back of the faceplate. (Figure A)
3.
Secure mounting brackets to the radio housing with the supplied carriage bolts
and nuts. (Figure A)
4.
Then slidethe ISO brackets onto the the rear support tray and snap the tray onto
the back of the radio housing. (Figure A)
4.
Slide the radio into the radio opening, aligning the holes in the radio to the holes
in the ISO brackets. Then secure the radio to the brackets with the suppled
screws. (Figure B)
5.
Locate the factory wiring harness and antenna plug in the dash. Metra
recommends using the proper mating adapter from Metra or AXXESS. Re-
connect thenegative battery terminal and test the radio for proper operation.
6.
Reassemble dash in reverse order of disassembly using screws previously
removed. (Figure B)
