1.
Place the gear shifter in low and remove the
rubber trim boot from the steering column.
2.
Remove (2) Phillips screws from the radio trim bezel.
3.
Unhook the ashtray/light wiring terminal and
remove the trim bezel. (Figure A)
4.
Remove the hardware securing the factory mounting
brackets to the factory radio. (Figure B)
5.
Remove and retain the brackets.
Oldsmobile Ninety-Eight
1984-1990/Delta 88
1986-1988
Oldsmobile Cutlass Calais
1984-1991
Oldsmobile Achieva
1992-1995
1.
Remove (4) screws from the top edge of the dash
trim bezel. (Figure A)
2.
Remove (2) screws from the bottom edge of the
bezel. (Figure A)
3.
Unsnap the A/C ducts, disconnect the light switch
and remove the bezel.
4.
Remove the hardware securing the factory mounting
brackets to the factory radio. (Figure B)
5.
Remove and retain the brackets.
1.
Remove the console/glove box assembly and (3)
screws below the box.
2.
Lift up the parking brake trim and remove (2)
screws from the gear shifter trim. (Figure A)
3.
Remove the ashtray from the gear shifter area and
(2) 7mm screws exposed.
4.
Using a screwdriver, depress the retainer tabs on
the dash ashtray, pull the ashtray out and remove (2)
7mm hex-head screws from the ashtray bracket.
5.
Remove the hardware securing the factory mounting
brackets to the factory radio. (Figure B)
6.
Remove and retain the brackets.
(Figure A)
(Figure B)
(S-10 application
shown as example)
(Figure A)
(Figure B)
(S-10 application
shown as example)
(Figure A)
(Figure B)
(S-10 application
shown as example)
Dash Disassembly 99-4644
