DIN radio provision
Kit Assembly 99-4644
(Figure B)
(Figure A)
1.
Choose a faceplate (according to the desired installation depth) and snap it onto
the front of the radio housing and secure with (4) hex-head screws. (Figure A)
2.
Secure mounting brackets to the radio housing with the supplied carriage bolts
and nuts. (Figure A)
3.
Then snap the rear support tray onto the back of the radio housing. (Figure A)
4.
Silde the DIN cage into the kit and secure by bending the metal locking tabs.
(Figure B)
5.
Locate the factory wiring harness and antenna plug in the dash. Metra
recommends using the proper mating adapter from Metra or AXXESS. Re-
connect thenegative battery terminal and test the radio for proper operation
6.
Reassemble dash in reverse order of disassembly using screws previously
removed. (Figure B)
