PN T900-014, Rev B
Troubleshooting
Error Messages are viewed and acknowledged on the
System Settings
screen.
When the Status LED on the front panel is RED it indicates that there are sys-
tem errors or the status of the ta7000F Gas Purity Monitor has changed. The
System Status
screen displays error messages that the system has encoun-
tered. From the
System Settings
screen, check the
System Errors
area for
error messages (alarms) that have been detected by the ta71000F Monitor.
Error Messages
This section lists the Error messages that can be triggered by the system, to
alert you to potential or impending problems with the ta7000F. Descriptions of
the Errors, along with possible trigger conditions, and corrective action to take
to correct the Errors, are also included.
Error Condition / Description / Corrective Action
Chassis Controller Error
Internal electronics failure.
Corrective Action:
Contact AMETEK Service or qualified service representative for troubleshooting assistance.
Detector Controller Error
Internal electronics failure.
Corrective Action:
Contact AMETEK Service or qualified service representative for troubleshooting assistance.
Figure 4-1.
System Settings screen.
System Settings
Idle Mode
12:34:25
Edit Print Page
Clock: 10-Jan-03 12:34:25
Print Chromatograms:
EDL mode:
+
+
*
-------------------- System Errors --------------------
Ver. 2.70
Troubleshooting
|
4-1
