MetalMaster SJM-2.5, Руководство по эксплуатации

Страница: 19 / 31

19
OPERATION MANUAL
5. MAINTENANCE
5.1 SCHEDULE
For optimum performance from your machine, follow this maintenance schedule and refer to
any specific instructions given in the maintenance section.
Daily Check
• Loose mounting bolts.
• Worn or damaged wires.
• Check/adjust lubrication.
• Any other unsafe condition.
5.2 LUBRICATION
The recommended lubrication in this manual is based on light-to-medium usage. Keeping in
mind that lubrication helps to protect the value and operation of the machine, these
lubrication tasks may need to be performed more frequently than recommended here,
depending on usage.
Failure to follow reasonable lubrication practices as instructed in this manual could lead to
premature failure of machine parts and possibly void the warranty.
1. On top of the machine and near the shafts are grease nipples that feed grease to the
drive gears and bearings.
These need to be greased WEEKLY. (Fig. 5.1)
2 . Unpainted machined surfaces need to be covered with a light oil to prevent rust.
These need to be covered with a light oil DAILY
3. Oil the Upper Shaft Elevation Crank thread
This needs to be covered with a light oil WEEKLY
F
ig
.5.1