MetalMaster SJM-2.5, Руководство по эксплуатации

Страница: 11 / 31

11
OPERATION MANUAL
2.2 SPECIFIC SAFETY FOR SWAGE & JENNY MACHINE
Safety glasses must be worn when
operating this equipment
Dust mask must be worn when operat-
ing in high dust areas.
Long and loose hair must be contained
when operating this equipment.
Safety footwear must be worn when
operating this equipment
Close fitting/protective clothing must
be worn when operating the machine
Hearing protection must be used when
operating in a noisy environment
PRE-OPERATIONAL SAFETY CHECKS
q
Locate and ensure you are familiar with all machine operations and controls.
q
Ensure all guards are fitted, secure and functional. Do not operate if guards are missing or
faulty.
q
Working parts should be well lubricated and the dies are free of rust and dirt.
q
Check workspaces and walkways to ensure no slip/trip hazards are present.
q
Be aware of other people in the area and ensure the area is clear before using equipment.
OPERATIONAL SAFETY CHECKS
q
Adjust the chosen dies slowly and in small adjustments.
q
Take care during the initial feeding of the workpiece into the dies.
q
Hold the workpiece sufficiently far back from the edge being fed into the dies, to allow for
the in-feed speed of the machine.
q
Wind handle at a slow even rate. Be aware of rotating dies
q
Only one person may operate this machine at any one time.
ENDING OPERATIONS AND CLEANING UP
q
Ensure the machine is left in a safe condition after use.
q
Leave the work area in a safe, clean and tidy state.
POTENTIAL HAZARDS AND INJURIES
q
Sharp edges and burrs.
q
Crush and pinch points.
q
Hair/clothing getting caught in moving machine parts.
q
Operator’s hands may be caught and drawn into the rotating dies.
DON’T
q
Do not use faulty equipment. Immediately stop and repair suspect machinery.
q
Do not attempt to form material beyond the capacity of the machine.
DO NOT use this machine unless you have been instructed in its safe use and
operation and have read and understood this manual