7. Step through job and find collisions
Press on the bend sequence numbers (
Seq
) below the graphic one after the other from left to
right and see how it will fold up and whether there are any collisions. As you step through the
numbers, the folding will be animated on the graphic
8. Alter the Bend Sequence
Press the bend sequence button to go to the bend sequence page
Touch on the first bend (red dot on profile), it will turn grey, then the next bend and the next
until complete. As you go along, you can see on the right how it would be folding. If the wrong
bend is selected, use the UNDO button. Alternatively, enter the bend sequence by pressing on
the bend numbers below the profile. Screen returns to main automatically after last bend
entered.
Page 8
Instruction Manual For Fasfold Controller
04/12/2014
