26. The Calibrate screen
The settings screen allows the
operator to change the how the
pressbrake and all of the axes
operate.
To open the settings screen press
calibrate on the main screen and
enter the password on the keypad
displayed.
The different sections are displayed
down the left hand side, the main
sections are Axis, Port, Machine, and
Program.
On the right is a diagram of the machine, showing the states of various switches attached.
Accepting or cancelling changes is done in the bottom left corner, this is also when you can access
the Commissioning Manager.
Axis:
The axis section controls the settings for each axis on the machine. Each axis can either be controlled
by the plc or a servo drive, or it can be not present on the machine at all.
Port:
The port section controls how the PLC and servo drives communicate with the Program. Some
machines may have different devices on different ports. Check with your supplier or CNC Auto to
verify these settings.
Machine:
The settings that belong to the machine rather than a specific axis appear in this section.
Program:
The settings that belong to the program rather than the machine appear in this section.
Page 18
Instruction Manual For Fasfold Controller
04/12/2014
