MetalMaster Fasfold PB-135B Скачать руководство пользователя страница 20

Страница: 20 / 25

28. Calibrate Servo Drives

The Servo Drive option can be selected on

the top of the screen when an axis is

selected in the Axis.

Port:

This is the port that the PC will use to

communicate with the Servo, to setup the

port see the Calibrating Ports help file.

Address:

This is the address that is assigned to the

servo, to distinguish it from the other Servo

Drives or PLCs on the same port.

Actual Position:

This is the position that the Axis connected to the servo drive is currently at (measured in mm).

Calibration Factor:

This is the factor used to convert from the Servo Drives encoder pulses to an actual measurement

(mm per pulse).

Full Rotation:

The number of encoder pulses in a full rotation of the Servo Motor.

Tollerance:

This is the tolerance of the measurement from the Servo Drive.

Fast Speed:

This is the speed the Servo Motor moves at provided it is not close to the target.

Slow Speed:

This is the speed the Servo Motor moves at when it is close to the target.

Servo Settings:

This is used to set up the Servo Drives with defaults

from Fasfold.

Note: Each of these options requires the Servo Drive

be reset (turned off and then on) to take effect.

Note: It is recommended that you complete the

operations in this order.

Factory Defaults:

This option resets the Servo Drive to the Factory

Default settings.

Page 20

Instruction Manual For Fasfold Controller

04/12/2014

Содержание Fasfold PB-135B


























Результаты поиска

Содержание Fasfold PB-135B

Отзывы:

Похожие инструкции для Fasfold PB-135B

Бренды по названию

Популярные бренды

MetalMaster Fasfold PB-135B, Руководство пользователя

Результаты поиска

Содержание Fasfold PB-135B

Отзывы:

Похожие инструкции для Fasfold PB-135B

Бренды по названию

Популярные бренды