3. Draw a new Job using Quick draw
Press the Quickdraw button and the following screen will appear.
Starting from the top left point of the profile above, touch the screen approximately on each
corner where you would like each bend to be, the points will automatically snap to the grid and
the values are rounded off. Press
UNDO
to redo a bend
Undo
Removes last bend
Cancel
Exit without using current Shape
Advanced use of Quickdraw can be found in section 21.
When you are happy with the shape press OK and you will be returned to the main screen, where
you can fine-tune the values easily simply by touching on the dimension or angle to be altered.
4. Editing sizes and angles
Touch on any dimension or angle on the profile and enter the new value on the pop-up keypad.
Page 5
Instruction Manual For Fasfold Controller
04/12/2014
