9. Find collisions
Warning:
If a bend sequence has been set before, it will be lost when pressing the Collusion
button. The collusions button will automatically step through bends ad if a collision is found, it
will alter the bend sequence in an attempt to avoid collusions.
Press the collusions button and it will attempt to find an alternative bend sequence
automatically if the default 1,2,3,4 creates a collision.
If it finds a workable bend sequence, it does not mean it will be the best or the fastest. A
manual bend sequence can be set in section 8
10. Select correct V width
Pressing the V button will toggle between the different V’s on the current Die
11. Set Material Thickness and width
Use the 2 buttons below to enter the correct thickness and width.
Page 9
Instruction Manual For Fasfold Controller
04/12/2014
