Metallwarenfabrik Gemmingen Eisemann T 4411, Руководство по эксплуатации

Страница: 80 / 136

Seite 34
M
ain
tenanc
e of y
our p
ow
er gener
at
or
6.1.1. Engine oil change
The engine oil change will take place every 100 hours of operation, as described in the engine manual.
Because of its design, the process is performed with a drain hose, following the individual steps listed
below:
• Let it the engine warm up (ca. 5 min.).
• Decommission the power generating set.
• Remove the engine shaft, therefore loosen the 2 screws beneath the carrying handles..
• Provide a suitable container to catch the used oil beneath the oil drain plug.
• Remove the oil drain plug including the washer and allow the used oil to drain completely.
To fasten the process remove the dipstick.
• Reinstall the oil drain plug and a new washer, and tighten the oil drain plug securely.
• With the engine in a level position, fill with the recommended oil to the upper limit mark (bot-
tom edge of the oil fill hole) on the dipstick. The capacity is approximately 1,1 Litre.
Oil drain plug