Metallkraft PRM 30 F, Руководство по эксплуатации

Страница: 8 / 48

8 PRM F | Version 1.07 | EN
Safety
2.4 Personal protective equipment
Personal Protective Equipment is intended to protect people from compromi-
sing safety and health at work. Personnel must wear personal protective
equipment during the various operations on and with the machine, which are
specifically indicated in the separate sections of this manual.
The following section explains personal protective equipment::
2.5 Safety markings on the ring bending machine
Various safety markings are attached to the ring bending machine (Fig. 1),
which must be observed and followed.
Fig. 1: Safety markings - 1 Warning of dangerous electrical voltage - 2 Warning about rotating ma-
chine parts, danger of crushing during bending - 3 safety instructions
The safety markings attached to the ring bending machine must not be remo-
ved. Damaged or missing safety markings can lead to malfunctions, personal
injury and property damage. They are to be replaced immediately.
If the safety markings are not immediately recognizable and comprehensible,
the ring bending machine must be taken out of service until new safety mar-
kings have been made.
Ear protection
The goggles protect the eyes from flying parts and liquid
splashes.
Eye protection
The goggles protect the eyes from flying parts and liquid
splashes.
Protective gloves
The protective gloves protect the hands from sharp-edged
components as well as from friction, abrasions or deeper
injuries.
Safety shoes
The safety shoes protect the feet against bruising, falling
parts and slipping on slippery surfaces.
Protective clothing
The protective clothing is tight-fitting clothing with low tear
resistance.
1 2
3