Metallkraft PRM 30 F, Руководство по эксплуатации

Страница: 21 / 48

Operation
PRM F | Version 1.07 | EN 21
8.1 Connect the ring bending machine to the mains
Connect the ring bending machine to the mains in the following steps.
Step 1: The main switch must be switched off.
Step 2: Connect the power cord to the mains.
Step 3: Turn the main switch from position "0" to "1". The operation indicator
lights. Press the START button.
If the operation indicator does not light up, there is a connection problem. In
this case, replace the cable ends between the connections (L1, L2) - (L2, L3)
or (L1, L3) and restart.
Check motor direction of rotation Step 1: Briefly put the motor into operation with the pedals and look at the di-
rection of rotation when the engine is coasting.
In the wrong direction of rotation of
the motor Step 2: If the direction of rotation of the motor is incorrect, replace two phases
at the connection. This may only be done by a qualified electrician.
Step 3: Check the direction of rotation of the motor by switching on the motor
only briefly and looking at the direction of rotation when the motor is
coasting.
9 Operation
DANGER!
Danger to life due to electric current!
There is an immediate danger of electrocution on contact
with live components.
- The machine may only be connected by qualified electricians.
- Work on the electrical system should only be carried out by
qualified electricians.
Wear ear protection!
Wear eye protection!
Wear safety gloves!
Wear safety shoes!
Wear protective clothing!