Metallkraft PRM 30 F, Руководство по эксплуатации, Страница: 33 / 48

Cleaning and maintenance
PRM F | Version 1.07 | EN 33
10.2 Lubrication
Fig. 25: Lubrication points on the ring bending machine
10.3 Cleaning the electrical box
Step 1: Switch off the machine and disconnect the power plug.
Step 2: Open the electrical box and clean it inside with a dry cloth. Never use
liquid detergents!
Step 3: Check the connections to the various connections, secure looser
connections.
Step 4: Close the door of the electric box and connect the machine to the
mains. Start the machine and check all functions.
10.4 Disruptions, Possible causes and measures
No. Equipment part Interval Lubricant
1 Thread of the spindle Every day Grease
2 Bearings of rollers, waves weekly Grease, Oil
3 Bearings of guide rollers weekly Grease
4 Drive chain half-yearly Grease
Disorder Possible cause Remedy
The ring bending machine does not
work. 1. The electrical connection could be
wrong.
1. Check the electrical connection.
2. Contact the dealer / manufacturer.
The engine is still running, but the ring
bending machine is not moving. 1. The engine is turning in the wrong
direction.
1.Check the motor rotation direction.
2. Contact the dealer / manufacturer.
The ring bending machine does not
bend the materials as stated in the ca-
talog. 1. The material thickness could be
wrong.
1. Check the material to be bent.
2. Contact the dealer / manufacturer.