Metallkraft PRM 30 F, Руководство по эксплуатации

Страница: 18 / 48

18 PRM F | Version 1.07 | EN
Assembly
Setting up the ring bending machine
Step 1: Check the ground with a spirit level for horizontal alignment, if neces-
sary, compensate for slight unevenness.
Step 2: Park the ring bending machine on a flat, firm and vibration-free ground.
Step 3: Secure the ring bending machine with ground anchors to the ground.
Step 4: Connect the transportable controller with the standoff rod to the ma-
chine.
Fig. 11: Anchoring the ring bending machine
WARNING!
Crushing!
The machine may tilt during deployment and cause serious
injury.
- The machine must be set up by at least 2 people together.
Wear safety gloves!
Wear safety shoes!
Wear protective clothing!
NOTE!
After setting up, remove the protective agent from the rol-
lers, which has been applied in the factory to protect against
rusting.
- Use a cloth and usual solvents (eg benzine).
- No water, no nitrolic solvents or similar use!
NOTE!
The moving parts must be free of dirt and dust.
- If necessary, lubricate the moving parts as specified in the
lubrication chart.