Merlin medical MC10 PLUS, Руководство по эксплуатации

Страница: 46 / 60

43
5.6 Stopping of an incubation time
If the incubation time keeper of a measuring position has been started by mistake an abort can
be caused by pressing the measuring activating key once again. By doing so this measuring
position is prepared for the measurement start simultaneously. If the user has entered “Yes” for
the point “Force incubation time” in the settings menu prior to the measurement an abort of
the incubation is not possible.
5.7 Stopping after a mistakenly start of a measurement
If the measurement has been started mistakenly or the time keeping has not been stopped
automatically for other reasons the measurement can be stopped at any time by inserting a new
cuvette with ball into the measuring position. Let the cuvette turn approximately 5 seconds,
then lift it slightly respectively remove this cuvette.
For preparing a new measurement press the activating key below the measuring position in question or
reset all measuring positions simultaneously by pressing the F3-key.
5.8 Switching off the device
If the analyser is not employed for a longer period of time it is recommended to switch off the
instrument by pressing the on-/off-switch at the back off the housing.