Merlin medical MC10 PLUS, Руководство по эксплуатации

Страница: 23 / 60

20
3.3 Test parameters
After switching on the analyser select the menu test parameter in the start menu by using the arrow
keys and confirm your selection by pressing ENTER. (The test parameter menu is protected by a PIN and
can only be entered by instructed staff).
Start menu
Measure mode
Test parameter
Settings menu
Patient memory
Service menu
Here different parameter specifications can be determined. By selecting the parameter to be modified
via the arrow keys and by confirming with ENTER you get into the display of the according parameter.
Depending on the parameter following settings can be done:
PT PTT FIB TZ FAK
Test name PT, NT or TT PTT FIB TZ FAK
Incubation time 30, 40, 50, 60,...
Result format number of digits before and after decimal point
Calibration
several values
1) -
several values
1) -
sev. values
1)
Calculation lin/rezi - log/log log/lin
Result unit % sec. g/L. sec. sec.
Calibration value max + min - max + min - max + min
INR-Calculation YES / NO - - - -
INR-Std.-Value
value
2) - - - -
ISI-Value
value
3) - - - -
Ball or optical method ball (mechanical)
Single or double single / double
Deviation (VC) freely adjustable
Start delay freely adjustable between 3,5 and 30 seconds
Timeout time freely adjustable (depending on result format)
FP 1 FP 2 FP 3 Emergency Photometer
Test name freely programmable this
parameter
reverts to
two other
parameters
this
parameter
reverts to one
other
parameter
Incubation time 30, 40, 50, 60,...
Result format number of digits before and after decimal point
Calibration
several values
1)
Calculation several calculation formulas
Result unitt freely programmable
Calibration value max + min
INR-calculation YES / NO
INR-Std.
value
2)
ISI-value
value
3)
Ball or optical method ball (mechanical) or optical
Single or double single / double double
Deviation (VC) freely adjustable (6%)
Start delay freely adjustable between 3,5 and 30 seconds
Timeout time freely adjustable (depending on result format)