1-4
October 2014 | Revision 1.0
Meridian Manufacturing, Inc.
PRODUCT WARRANTY
REGISTRATION FORM
DEALER INSPECTION REPORT
____Wheel nuts/bolts must be tightened to proper torque on all wheels
____Make sure owner is instructed to check wheel bolt/nut torque at
5, 10, 25, and 50 miles; then check annually
____Make sure electric brakes are working
____Make sure all guards/shields are installed correctly
____Make sure all safety signs are installed and ledgible
____If equipped, check gasoline engine fuel level
____Make sure turn signal lights are operating and visible
____Review safety and operating instructions with owner
____Verify receipt of all options ordered
____Verify that tow vehicle is large enough to safely tow the trailer
____Inspect customer’s hitch for 2-5/16” ball
____Make sure hitch-to-tongue bolts are tight
____Make sure safety chains are properly attached and are in good working condition
____Wiring harness plug must be in working condition and fit into tow vehicle’s receptacle
____Make sure license plate light is operating and visible
____Make sure brake lights are operating and visible
____Check air pressure in tires
____Reflector tape must be clean and visible
____Check breakaway battery
____If equipped, check gasoline engine oil level
____If equipped, start gasoline engine
____Make sure breakaway cable and pin are supplied with trailer
____Make sure all four fuel placards are installed once the tank has been filled
____Make sure 12 volt battery is fully charged and in good working order
Содержание Fuel Express
Страница 1: ...Certified For Canadian Market ...
Страница 6: ......
Страница 92: ...17 20 October 2014 Revision 1 0 Meridian Manufacturing Inc APPENDIX A ...
Страница 93: ...Meridian Manufacturing Inc October 2014 Revision 1 0 17 21 ...