Meridian Fuel Express, Руководство оператора

Страница: 37 / 96

Meridian Manufacturing, Inc. October 2014 | Revision 1.0
8-2
22. Make sure the directional and brake
lights on the trailer are connected and
working properly.
23. Department of Transportation (DOT) and
Transport Canada requires that all highway
safety devices, such as fenders, mud flaps,
and lighting, are properly installed and in
working condition before using the trailer.
24.
A 3/4 ton or larger capacity truck should
be used for towing.
8.2 CONNECTING THE TRAILER
WARNING
Ensure that all bystanders, especially
small children, are clear of the working
area. Ensure there is enough room and
clearance to safely back up to the trailer.
1.
On a flat surface, use the trailer jack to level
the trailer.
WARNING
Towing the fuel trailer with diesel fuel,
when it is not in a level position, could
cause an upward force on the tongue,
separating the trailer from the tow vehicle.
Make sure the trailer is set up with downward
pressure on the tongue assembly.
2. Adjust the height of the receiver to align with
the tow ball or be lower than the tow ball.
Once aligned, tighten both bolts to 70 ft-lb
(95 N·m).
WARNING
The receiver must be bolted to the frame
with two bolts. The use of only one bolt
could cause the receiver assembly to
separate from the trailer, resulting in injury or
death to bystanders. Do not use the trailer if
only one bolt is installed.
3. Remove retainer clip (1). Release or open
the receiver by lifting locking lever (2) into the
open position.
4. Using the jack, raise the hitch above the ball
on the tow vehicle.
5. Slowly back the tow vehicle until the hitch and
ball are aligned.
6.
Lower the hitch onto the ball.
Chapter 8 | Towing