Merging MERGING+NADAC Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 75

Merging MERGING+NADAC Скачать руководство пользователя страница 65

nadac.merging.com

Page 64

6.

The Select Source page lists all the available network sources and physical sources.

The currently selected source will be shown in yellow. To select a different source, simply click or tap
on its name in the list. The new source will be selected and the display will revert to the Home page.

To go back to the Home page without changing the selected source, click or tap the

icon on

lower left hand side of the page.

7.

The Trim/Polarity page allows trim and polarity for each individual channel to be changed. Figure 82
shows the page that will be displayed for an 8-channel unit. For the stereo unit, only 2 channels will
be shown.

To change a channel trim, move the slider horizontally.

To change a channel phase (polarity) click or tap the appropriate

icon. A grayed out icon indicates

normal phase and a white one indicates inverted phase (polarity).

To go back to the Home page, click or tap the

icon on lower left hand side of the page.

Figure 81. NADAC App Select Source page.

Figure 82. NADAC App Trim/Polarity page.

«
...
63
64
65
66
67
...
»

Содержание MERGING+NADAC












































































Отзывы:

Нет отзывов