Merging MERGING+NADAC, Справочное руководство

Страница: 28 / 75

nadac.merging.com
Page 27
Use the Rotary control to highlight the desired source, you may have to scroll down
to see them all, then briefly press the Rotary control. The display will revert to the
Home screen and the name of the new source will be shown in the Input source area
at the bottom of the screen. If the source is not valid i.e. there is a problem with the
selected network source, or one of the three standard digital inputs has been
selected, but no valid data is being received, the source name will appear in red.
If the network source name is too long to fit on the display, it will be continuously
scrolled across the Input Source area of the Home screen.
Shutdown This is the recommended method of shutting the unit down and ensures that any
changes made to the unit’s settings will be stored in the system’s memory and
recalled when it is next turned on. Use the Rotary control to highlight the shutdown
option, then briefly press the Rotary control. A new menu page will open. Use the
Rotary control to select the Yes option and briefly press the Rotary control again.
The shutdown process will start. When the display and power switch are no longer
illuminated, the NADAC may be safely disconnected from the mains supply.
You can also switch the unit off by pressing and holding down the power switch,
but in this case there is a remote possibility that any changes you made to the unit’s
settings may not be recalled the next time it is switched on.