Merging MERGING+NADAC Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 75

background image

nadac.merging.com

Page 36

When in Auto mode, any changes to the network configuration, such as connecting the NADAC to
another switch or computer, changing the main router DHCP settings requires that the unit be
rebooted, as well as any computer having been subjected to these changes.

Address:

To change the IP address, with the

IP Settings

options box set to Manual, use the

Rotary Control to outline the first field in the address line, then briefly press the
control. The number in this field will appear highlighted to indicate that it may now
be changed. Rotate the control clockwise to increase the number and counter
clockwise to decrease the number. When the required number has been set, briefly
press the control and the highlighting will disappear indicating that the change has
been accepted.

Repeat the process to make changes to the three other fields in the IP address line.

Netmask

: To change the Netmask, with the IP Settings options box set to Manual,

use the Rotary Control to outline the

Netmask

options box, then briefly press the

control. This will open a menu showing the Netmask options available. The asterisk
shows the currently selected Netmask.

Use the control to highlight the required Netmask setting and briefly press the
control again. The display will revert to the Network menu, Figure 31, with the new
setting shown in the Netmask option box.

If you have changed the IP address or Netmask setting you must complete the next step.

Apply:

If you have made any changes to the network settings you must save the new
settings and reboot the unit. Do this by using the Rotary Control to outline the

Apply

button, then briefly press the control. When the unit has rebooted and the

home screen is displayed, it will be ready to use with the new network settings.

The NADAC has no DHCP-server capability.

By default the NADAC IP setting is set to “Auto” configuration mode, which gives an
address in the range 169.254.xxx.xxx if no DHCP server is present on the network. Users are free to put
a DHCP server in their RAVENNA network with a customized address range and the
NADAC will get an IP address from this server. We recommend that user always restart the
NADAC if any changes have been made to the network configuration.

Merging Technologies recommend that the NADAC be configured in “Auto” mode.
Please be aware that when the NADAC is started in Maintenance mode, the IP
configuration mode defaults to Auto and cannot be changed.

«
...
35
36
37
38
39
...
»

Содержание MERGING+NADAC












































































Отзывы:

Нет отзывов

Похожие инструкции для MERGING+NADAC

Бренд: YOKOGAWA Страницы: 13

Бренд: Sima Страницы: 2

DCS SCARLATTI DAC

Бренд: Data Conversion Systems Страницы: 26

Бренд: APS Страницы: 70

Бренд: E-Lektron Страницы: 7

Бренд: Coretec Страницы: 38

Soleaf DASS 100i

Бренд: DASS Tech Страницы: 56

Бренд: Teac Страницы: 116

Бренд: ZyXEL Communications Страницы: 131

Бренд: Datavideo Страницы: 13

Бренд: CableTronix Страницы: 5

Бренд: Kaco Страницы: 52

SITE INVERTER 300

Бренд: ICT Страницы: 8

B+B SmartWorx 485USB9F-2W

Бренд: Advantech Страницы: 2

Бренд: DeLOCK Страницы: 2

Бренд: POWER ON BOARD Страницы: 13

Бренд: Littfinski Daten Technik Страницы: 2

Бренд: Olimpia splendid Страницы: 144

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды