Mercury MerCruiser Axius 350 MAG, Руководство пользователя

Страница: 35 / 151

Section 2 - Getting to Know Your Power Package
90-864197084 NOVEMBER 2008 Page 27
NOTE: When using the joystick, the computer moves the sterndrive in and out of gear even though the ERC handles remain in
neutral.
Typical ERC handles
a - Neutral
b - Forward
c - Reverse
d - Bow of boat
Adjustment
The amount of force needed to move the ERC handles and to move the ERC handles through the detentes is adjustable to help
prevent unwanted motion of the handle in rough water.
To adjust ERC handle tension:
1. Remove the port side cover for port lever adjustment, and starboard side cover for starboard lever adjustment.
2. Turn the screw clockwise to increase tension on the control handle and counter‑clockwise to decrease tension.
3. Adjust to tension desired.
To adjust ERC handle detent tension:
1. Remove the port side cover for port lever adjustment, and starboard side cover for starboard lever adjustment.
2. Turn the screw clockwise to increase tension on the control handle and counter‑clockwise to decrease tension.
3. Adjust to desired tension.
Starboard side with side cover removed.
a - ERC handle tension adjustment screw,
labeled "De"
b - ERC handle detent tension adjustment
screw, labeled "Fr"
Joystick—Basic Operation
The joystick offers precise, intuitive control of your boat during low speed and docking maneuvers. Engine speed is limited in this
mode to prevent excessive prop wash or unacceptable boat dynamics during maneuvers.
Though joystick operation is easy and intuititve, you should avoid using it until you have the opportunity to become familiar with
the joystick in open water. Thereafter, you should occaisionallly practice operating without the joystick in case the joystick becomes
inoperable.
Power Trim
Power trim allows the operator to adjust the sterndrive angle while underway to achieve the ideal boat angle for varying load and
water conditions. The trailering feature allows the operator to raise and lower the sterndrive unit for trailering, beaching, launching,
low speed (below 1200 rpm), and shallow water operation.
a
b
c
28086
d
28087
a
b