Mercury MerCruiser Axius 350 MAG, Руководство пользователя

Страница: 41 / 151

Section 2 - Getting to Know Your Power Package
90-864197084 NOVEMBER 2008 Page 33
•
SkyHook
—allows the boat to hold its position without lines or anchor
•
Response
—compensates for the effects of wind, waves, and currents on the boat's direction.
•
Auto Heading
—controls the boat on a pre‑determined heading
•
Track Waypoint
—controls the boat on a pre‑determined path with a single waypoint
•
Waypoint Sequence
—controls the boat on a pre‑determined path with multiple waypoints
a - SkyHook
b - Turn to starboard
c - Waypoint Sequence
d - Response
e - Track Waypoint
f - Auto Heading
g - Resume
h - Turn to port
The buttons on the Precision Pilot Trackpad have the following functions:
Function Description
SkyHook
Engages and disengages SkyHook. Mode is only available when the joystick is centered, both engines are
running, GPS and Heading Sensors are available, and levers are in neutral.
Turn < and >
Each press of the button causes a 10 degree course change in the Auto Heading mode. (A tap port or starboard
on the joystick initiates a one degree change in course.)
Waypoint
Sequence
Engages Waypoint Sequence, driving the boat on a course set with multiple waypoints on the charplotter.
Waypoint Sequence is available when the "WAYPOINT SEQUENCE" button is pressed, a NMEA‑0183 stream
is available from a chart plotter, and the GPS and heading sensor signals are available. When in "WAYPOINT
SEQUENCE" mode, the joystick or "<" or ">" will cause the Precision Pilot to change to heading control and
change the heading 1°.
Response
Increases or decreases the amount of control exerted by the Precision Pilot on disturbances to external course
changes in three levels. Selection will be in a "(123‑321)" format. The response levels can be calibrated.
Track
Waypoint
Engages Precision Pilot in (GPS) Track mode. Track can be engaged by either pressing the track button or
pressing the auto button then the track button. Route Tracking is available when the "Track" button is pressed,
a NMEA‑0183 stream is available from a chart plotter, and the GPS and heading sensor signals are available.
When in "Track" mode, the joystick or "<" or ">" will cause the Precision Pilot to change to heading control and
change the heading 1°.
Auto Heading
Engages Auto Heading mode. Heading control is available when the "Auto Heading" button is pressed, and
GPS and IMU signals are available. (See "Turn < and >" for course adjustment information.)
Resume
Resumes previous Auto/Track Course.
NOTE: Moving the steering wheel will always take control of the boat. A slight detent will have to be overcome to give the operator
feedback that the they are taking control from the Precision Pilot. The "Resume" button will return the Precision Pilot to control in
the previous mode.
35301
b
a
c
d
e
f
g
h