Mercury 2.8 EI 200 Скачать руководство пользователя

Страница: 52 / 118

SPECIFICATIONS

SECTION 4

Page 44

CMD-4081877 / 90-865861040 MARCH 2004

The closed cooling section should be kept filled year-round with an acceptable

antifreeze/coolant solution. Do not drain closed cooled section for storage, as this will

promote rusting of internal surfaces. If engine will be exposed to freezing temperatures,

ensure that the closed cooled section is filled with a properly mixed antifreeze/coolant

solution, to protect engine and closed cooling system to lowest temperature to which they

will be exposed.

NOTE:

A 50/50 antifreeze/coolant solution should be used except when operating where

seawater temperatures are greater than 32 degrees C (90 degrees F), then a 25 / 75

(antifreeze / water) solution can be used for improved cooling performance.

IMPORTANT: The antifreeze/coolant used in these marine engines must be a low

silicate ethylene glycol, containing special additives, and deionized, purified water.

Using other types of engine coolant may cause fouling of the heat exchangers, and

overheating of the engine. Do not combine different types of coolants without

knowing that they are compatible. Refer to the coolant manufacturer’s instructions.

Some acceptable types of antifreeze/coolants are listed in the following table. Refer to

Maintenance Schedules for respective change intervals.

Description

Part Number

Marine Engine Coolant

92-813054A2

Fleetguard Compleat with DCA4
Fleetguard Part Number: CC2825
Quantity: 3-3/4 liters, 1 U. S. Gallon

Obtain Locally

Содержание 2.8 EI 200























































































































Результаты поиска

Содержание 2.8 EI 200

Отзывы:

Похожие инструкции для 2.8 EI 200

Бренды по названию

Популярные бренды

Mercury 2.8 EI 200, Руководство пользователя

Результаты поиска

Содержание 2.8 EI 200

Отзывы:

Похожие инструкции для 2.8 EI 200

Бренды по названию

Популярные бренды