Mercury 2.8 EI 200 Скачать руководство пользователя

Страница: 77 / 118

MAINTENANCE

SECTION 5

Page 69

CMD-4081877 / 90-865861040 MARCH 2004

00000 was CD884 with CMD changes and additions

Water Separating Fuel Filter

WARNING

Be careful when draining water separating fuel filter. Diesel fuel is flammable. Be

sure ignition key is OFF. Do not allow fuel to contact any hot surfaces which may

cause it to ignite. Do not allow sources of open flame in the area. Wipe up any spilled

fuel immediately. Dispose of fuel soaked rags, paper, etc. in an appropriate air tight,

fire retardant container. Fuel soaked items may spontaneously ignite and result in

a fire hazard which could cause serious bodily injury or death.

CAUTION

Any water entering the fuel injection system will disable the system. Check for wa-

ter in water separating fuel filter before starting, daily.

CAUTION

If water should enter the fuel injection system, take unit to an authorized Cummins

MerCruiser Diesel dealer / distributor IMMEDIATELY, so that corrosion and rusting

of the injectors and other components can be avoided.

00000 wasCD880

A plunger-type of hand pump/primer is located on the engine mounted water separating fuel

filter bracket and is used to:

•

Refill the fuel filter when changing the filter

•

Refill the fuel system if the system was run dry

•

To prime the fuel system if the engine has not been run for a while.

The engine mounted water separating fuel filter is equipped with a water in fuel (WIF) sensor

that should alert the operator when water is present in the filter. This fuel filter needs to be

replaced at specified intervals or whenever water is detected in the fuel, whichever comes

first.
The operator may be alerted that the WIF sensor has detected water in the fuel. Depending

upon the boat instrumentation package and if equipped:

•

A message may be displayed on an instrument

•

An indicator lamp may be illuminated

Refer to

Section 2 – Getting To Know Your Power Package

When the engine is equipped with a remote mounted primary filter (such as a Racor filter)

it should be drained or replaced at specified intervals, or whenever water is detected in the

engine mounted fuel filter.

Содержание 2.8 EI 200























































































































Результаты поиска

Содержание 2.8 EI 200

Отзывы:

Похожие инструкции для 2.8 EI 200

Бренды по названию

Популярные бренды

Mercury 2.8 EI 200, Руководство пользователя

Результаты поиска

Содержание 2.8 EI 200

Отзывы:

Похожие инструкции для 2.8 EI 200

Бренды по названию

Популярные бренды