Mercury 2.8 EI 200 Скачать руководство пользователя

Страница: 112 / 118

CUSTOMER ASSISTANCE INFORMATION

SECTION 8

Page 104

CMD-4081877 / 90-865861040 MARCH 2004

CD944 w/ CMD changes

Owner Service Assistance

Local Repair Service

Always return your Cummins MerCruiser Diesel (CMD



) powered boat to your authorized

dealer should the need for service arise. Only he has the factory trained mechanics,

knowledge, special tools and equipment and the genuine Quicksilver parts and

accessories* to properly service your engine should the need occur. He knows your engine

best.
Contact 1-800-DIESELS to locate your closest distributor.

* Quicksilver parts and accessories are engineered and built especially for Cummins MerCruiser Diesel

sterndrives and inboards.

0114 w/ CMD changes

Service Away From Home

If you are away from your local dealer and the need arises for service, contact the nearest

authorized dealer. Refer to the Yellow Pages of the telephone directory or by using the

service locator on the Cummins website (www.Cummins.com). If, for any reason, you

cannot obtain service, contact the nearest Regional Service Center. Outside the United

States and Canada, contact the nearest Marine Power International Service Center.

0115 W / changes – CMD

Stolen Power Package

If your power package is stolen, immediately advise the local authorities and Cummins

MerCruiser Diesel of the model and serial number(s) and to whom the recovery is to be

reported. This information about the stolen motor is placed into a file at Cummins

MerCruiser Diesel to aid authorities and dealers / distributors in recovery of stolen motors.

0116 w / changes – CMD

Attention Required After Submersion

1. Before recovery, contact an authorized Cummins MerCruiser Diesel dealer / distributor.
2. After recovery, immediate service by an authorized Cummins MerCruiser Diesel dealer

/ distributor is required to prevent serious damage to power package.

Содержание 2.8 EI 200























































































































Результаты поиска

Содержание 2.8 EI 200

Отзывы:

Похожие инструкции для 2.8 EI 200

Бренды по названию

Популярные бренды

Mercury 2.8 EI 200, Руководство пользователя

Результаты поиска

Содержание 2.8 EI 200

Отзывы:

Похожие инструкции для 2.8 EI 200

Бренды по названию

Популярные бренды