Honeywell Modutrol IV M945F Скачать руководство пользователя

Страница: 1 / 12

PRODUCT DATA

63-2631

Series 90

Modutrol IV™ Motors

APPLICATION

The Series 90 Modutrol IV™ Motors are spring return and

non-spring return modulating proportional control motors. Use

these motors with controllers that provide a Series 90 output

to operate dampers or valves.

FEATURES

• Replaces M934A,D, M941, M944A,C,D, M945A,D,F,

M954, M965, and M975 motors.

• Integral junction box provides NEMA 3 weather

protection.

• Integral spring return returns motor to normal position

when power is interrupted.

• Motor and circuitry operate from 24 Vac. Models

available with factory installed transformer, or a field

added internal transformer.

• Quick-connect terminals are standard—screw terminal

adapter is available.

• Adapter bracket for matching shaft height of older

motors is available.

• Motors have field adjustable stroke (90° to 160°).
• Die-cast aluminum housing.
• Integral auxiliary switches are available factory

mounted, or can be field added.

• Nominal timing standard of 30 seconds (90° stroke),

and 60 seconds (160° stroke). Other timings available.

• Spring return motors can operate valve linkages form

power end or auxiliary end shafts for normally closed

or normally open valve applications.

• All models have dual shafts (slotted and tapped on

both ends).

• All models have auxiliary switch cams.
• Fixed torque throughout the entire voltage range.
• Motors are designed for either normally open or

normally closed valves and dampers.

• Field addable interface modules can be mounted in the

junction box to upgrade the motor to Series 70

(electronic) control.

Contents

Application ........................................................................

Features ...........................................................................

Specifications ...................................................................

Ordering Information ........................................................

Installation ........................................................................

Settings and Adjustments .................................................

Operation .......................................................................... 10

Checkout .......................................................................... 12

Replacement .................................................................... 12

Содержание Modutrol IV M945F













Результаты поиска

Содержание Modutrol IV M945F

Отзывы:

Похожие инструкции для Modutrol IV M945F

Бренды по названию

Популярные бренды

Honeywell Modutrol IV M945F, Данные о продукции

Результаты поиска

Содержание Modutrol IV M945F

Отзывы:

Похожие инструкции для Modutrol IV M945F

Бренды по названию

Популярные бренды