MerCruiser 3.0L TKS Alpha, Руководство пользователя

Страница: 52 / 92

Section 5 - Maintenance
Page 44 90-8M0053263 NOVEMBER 2010
1. Remove oil fill cap.
a - Oil fill cap
IMPORTANT: Add the specified engine oil to bring the level up to, but not over, the full or OK range mark on the dipstick.
2. Add the specified engine oil to bring the level up to, but not over, the full or OK range mark on the dipstick. Recheck oil level.
3. Replace the fill cap.
Engine Model Capacity Fluid Type
3.0L (181 cid)
3.8 liters
(4 U.S. Quart)
Mercury/Quicksilver Synthetic Blend MerCruiser Engine Oil 25W‑40
Changing Oil and Filter
Refer to the Maintenance schedule for the change interval. Engine oil should be changed before placing the boat in storage.
IMPORTANT: Change engine oil when the engine is warm from operation. Warm oil flows more freely, carrying away more
impurities. Use only recommended engine oil (refer to Specifications).
Easy Engine Oil Drain System
NOTE: Boat must be out of water to perform this procedure.
1. Loosen the oil filter to vent the system.
2. Remove the bilge drain plug.
3. Pull tether through the bilge drain.
a - Bilge drain plug
b - Tether
c - Clip
d - Oil drain hose plug
e - Oil drain hose
f - Bilge drain flange
4. Place the oil drain hose in a suitable container.
5. Remove the drain plug from the oil drain hose.
6. After oil has drained completely, install the drain plug in the oil drain hose.
7. Push the hose through bilge drain and install the plug.
a
7519
f
e
d
c
b
a
7284