MerCruiser 3.0L TKS Alpha Скачать руководство пользователя страница 28

Страница: 28 / 92

Section 2 - Getting to Know Your Power Package

Page 20

90-8M0053263 NOVEMBER 2010

Throttle Only Button -

Allows engine throttle advancement without shifting the engine. This is done by disengaging the shift

mechanism from the control handle. The throttle only button can be depressed only when the remote control handle is in the

neutral position, and should only be used to assist in starting the engine.

Lanyard Stop Switch -

Turns the ignition off whenever the operator (when attached to the lanyard) moves far enough away from

the operator's position to activate the switch. Refer to

Lanyard Stop Switch

for information on the use of this switch.

Control Handle -

Operation of the shift and throttle are controlled by the movement of the control handle. Push the control handle

forward from neutral with a quick firm motion to the first detent for forward gear. Continue pushing forward to increase speed. Pull

the control handle back from neutral with a quick firm motion to the first detent for reverse gear and continue pushing back to

increase speed.

Control Handle Tension Adjustment Screw - (not visible)

This screw is used to adjust the effort required to move the remote

control handle. Refer to instructions provided with remote control for complete adjustment instructions.

Trim/Tilt Button -

Refer to

Power Trim

Console Mount Features

a -

Throttle Only Button

b -

Control Handle

c -

Power Trim Switch

d -

Trailer Switch

Throttle Only Button -

Allows engine throttle advancement without shifting the engine. This is done by disengaging the shift

mechanism from the control handle. The throttle only button can be depressed only when the remote control handle is in the

neutral position.

Control Handles -

Operation of the the shift and throttle are controlled by the movement of the control handle. Push the control

handle forward from neutral with a quick firm motion to the first detent for forward gear and continue pushing forward to increase

speed. Pull the control handle back from neutral with a quick firm motion to the first detent for reverse gear and continue pushing

back to increase speed.

Control Handle Tension Adjustment Screw - (not visible)

This screw is used to adjust the effort required to move the remote

control handle. Refer to instructions provided with remote control for complete adjustment instructions.

Power Trim Switch -

See

Power Trim

section for detailed power trim operating procedures.

Trailer Switch -

Used to raise drive unit for trailering, launching, beaching or shallow water operation. See

Power Trim

for detailed

trailer switch operation.

Power Trim

Power trim allows the operator to adjust the sterndrive angle while underway, to provide the ideal boat angle for varying load and

water conditions. Also, the trailering feature allows the operator to raise and lower the sterndrive unit for trailering, beaching,

launching, low speed (below 1200 RPM engine speed) and shallow water operation.

WARNING

Excessive trim can cause serious injury or death at high speeds. Use caution when trimming the sterndrive, and never trim out

beyond the gimbal ring support flanges while the boat is underway or at engine speeds above 1200 RPM.

mc79503-1

Содержание 3.0L TKS Alpha





























































































Результаты поиска

Содержание 3.0L TKS Alpha

Отзывы:

Похожие инструкции для 3.0L TKS Alpha

Бренды по названию

Популярные бренды

MerCruiser 3.0L TKS Alpha, Руководство пользователя

Результаты поиска

Содержание 3.0L TKS Alpha

Отзывы:

Похожие инструкции для 3.0L TKS Alpha

Бренды по названию

Популярные бренды