P 5
Please retain product label and instructions for future reference
Step 7
i) Fix the truss block in front of
the panel block with 2 x 50mm
screws. Position the block at the
top of the framing with the
angle pointing upwards into the
building, aligning the block
centrally along the join between
the side panels with one screw
in each panel.
ii) Fix the truss frame to the
block using 1 x 50mm screw.
ii
i
11
6x50mm Screws
Pre drill
hole
50mm
screw
11
11
Step 8
Fix a Truss support
between the two truss
frames and fix in place
using 40mm screws,
ensure you pre-drill
holes before fixing
together.
4x40mm Screws
40mm
screw
Pre drill
hole
10
10
Step 9
Place two roof sheets on
top of the plain gable
and truss.
Before fixing the roof
sheet to the truss frame
make sure the edge of
the roof sheet sits in the
middle of the truss frame
then fix using 40mm
screws. Fix the remaining
two roof sheets in the
same way.
48x40mm Screws
12x30mm Screws
Fix the eaves frame to the
roof sheet using 3x30mm
screws for each sheet.
b
b
40mm
screw
Pre drill
hole
7
12
Step 10
b
Once the roof is fixed
attach the building to
the floor with 50 mm
screws.
20x 50mm Screws
50mm
screw
Pre drill
hole
