%
When using a CCS (Combined Charging Sys-
tem) charging cable to charge with direct cur-
rent at a combo vehicle socket, both vehicle
socket connections
1
and
2
are used for
charging.
Charging options for the high-voltage battery
(mode 2, 3 or 4):
R
Charging through recuperation while the vehi-
cle is in motion
R
Charging with alternating current when sta-
tionary:
-
at a mains socket (mode 2)
-
at a wallbox or charging station (mode 3)
R
Charging with direct current when stationary:
-
at a rapid charging station (mode 4)
Depending on the country-speci c vehicle equip-
ment and your vehicle's charging cable, single
phase AC charging is also possible.
Observe the di erent grid requirements of your
current location when charging. Only use charging
cables which conform to the grid requirements.
Consult a quali ed electrician or your local grid
operator if you have any questions.
It is recommended that you charge the high-volt-
age battery at a wallbox or charging station due to
the improved charging performance and better
charging e ciency o ered.
SSttoowing t
wing the c
he char
harging cable
ging cable
Always stow the vehicle charging cable in the
charging cable bag provided and attach its spring
hook to the tie-down eye in the boot or the load
compartment.
Otherwise, the charging cable is not su ciently
secured.
Syst
System limits
em limits
The power output of the high-voltage battery may
be impaired by the following:
R
High or low outside temperatures
R
Electrical auxiliary consumers in the vehicle
being switched on, e.g. operating the air con-
ditioning system
R
Extended periods without charging
The charging time of the high-voltage battery may
be increased by the following:
R
High or low outside temperatures
R
Extended periods without charging
R
The maximum available charge current of the
charging facility
R
The settings of the charging process in the
multimedia system (
/
page 211)
NNoottes on c
es on char
harging t
ging the high-v
he high-volt
oltag
age batt
e batter
ery at t
y at the
he
mains socke
mains socket (mode 2)
t (mode 2)
&
DDAN
ANGER
GER Risk of fatal injury from incor-
rectly installed component parts
Connecting the charging cable to a mains
socket using incorrectly installed component
parts could cause a re or an electric shock,
for example.
#
Only connect the charging cable to a
mains socket that:
R
Has been properly installed and
R
Has been inspected by a quali ed electri-
cian
Driving and parking 195
195
Содержание EQE 350+
