Mercedes-Benz EQE 350+, Руководство пользователя

Страница: 395 / 541

While the vehicle is being raised, you can
manoeuvre at a maximum speed of 40 km/h.
#
Before loading the vehicle, wait until transport
level has been reached and the Transport
level status is shown.
% If the vehicle is raised to transport level, the
transport settings will continue to be shown
even a er a restart. Operation of the driver's
display is meanwhile restricted.
When the vehicle is at transport level, it is lowered
again in the following situations:
R
When driving faster than 40 km/h.
R
The 12 V battery is discharged.
The vehicle is adjusted to the height of the last
active level.
TTrranspor
ansporting t ting the v he vehicle ehicle
#
Load the vehicle onto the transporter.
#
Shi the transmission to position j .
#
Use the electric parking brake to secure the
vehicle against rolling away.
#
Switch o the vehicle and the power supply.
#
Only secure the vehicle by the wheels.
4MA 4MATIC v TIC vehicles ehicles
#
Make sure that the front and rear axles come
to rest on the same transportation vehicle.
* NNOOTE TE Damage to the drive train due to
incorrect positioning of the vehicle
#
Do not position the vehicle above the
connection point of the transport vehi-
cle.
UUnloading t nloading the v he vehicle ehicle
VVehicles wit ehicles with AIRMA h AIRMATIC TIC
#
Make sure that the vehicle is raised to trans-
port level before unloading (
/
page 262).
Low Lower ering t ing the v he vehicle ehicle a er a er unloading unloading
#
Switch on the power supply.
#
Switch on the vehicle.
#
Swipe upward in the transport settings to
select Standard level and press a .
The vehicle is adjusted to the height of the last
active level and the Lowering vehicle message
is displayed.
#
A er the vehicle has been lowered, press the
G button for at least two seconds.
The transport settings are closed.
392 392 Breakdown assistance