Mercedes-Benz EQE 350+, Руководство пользователя

Страница: 175 / 541

&
W WARNING ARNING Risk of burns due to repeatedly
switching on the seat heating
Repeatedly switching on the seat heating can
cause the seat cushion and seat backrest pad-
ding to become very hot.
In particular, the health of persons with limited
temperature sensitivity or a limited ability to
react to high temperatures may be a ected or
they may even su er burn-like injuries.
#
Do not repeatedly switch on the seat
heating.
To protect against overheating, the seat heating
may be temporarily deactivated a er it has been
switched on repeatedly.
The air inside the vehicle can be heated, ventila-
ted or cooled to the set temperature when the
vehicle is parked.
When the vehicle is connected to power supply
equipment, priority is given to charging the high-
voltage battery to a speci ed minimum charge.
The running time of pre-entry climate control may
be reduced under the following conditions:
R
The vehicle is not connected to power supply
equipment.
R
The high-voltage battery is not fully charged.
With active pre-entry climate control, the charge
level of the high-voltage battery may be reduced,
even if the charging cable connector is connec-
ted.
If present, seat ventilation is activated in cooling
and ventilation mode.
If present, the following functions are activated in
heating mode:
R
Seat heating
R
Steering wheel heater
R
Mirror heater
R
Rear window heater
R
Windscreen heater
When the set temperature is changed, the climate
control mode will automatically be updated. It will
be switched from heating mode to ventilation or
cooling mode, from cooling mode to ventilation or
heating mode or from ventilation mode to heating
or cooling mode.
Depending on the vehicle's equipment, the follow-
ing functions will also be adjusted during pre-
entry climate control if they have already been
switched on during regular vehicle operation:
R
Fragrancing
R
Ionisation
Se Setting pr tting pre-entr e-entry climat y climate contr e control f ol for depar or departure ture
time via t time via the climat he climate bar e bar
Multimedia system:
4
Climate menu
5
Pre-entry climate ctrl
Se Setting t tting the depar he departur ture time e time
%
The set departure times are used for the vehi-
cle's pre-entry climate control and for predic-
tions regarding the approximate state of
charge and range at the time selected. Addi-
tional information on the charging settings:
(
/
page 211).
#
Select Edit departure time u .
#
Select a departure time or set a new depar-
ture time.
172 172 Climate control