Mercedes-Benz EQE 350+, Руководство пользователя

Страница: 412 / 541

#
In the event of damage to the threads,
contact a quali ed specialist workshop
immediately.
#
Have the damaged wheel bolts or dam-
aged hub threads replaced.
#
Do not continue driving.
#
Observe the information on the choice of tyres
(
/
page 401).
For tyres with a speci ed direction of rotation, an
arrow on the side wall of the tyre indicates the
correct direction of rotation. Observe the direc-
tion of rotation when tting.
* NNOOTE TE Damage to the wheels' plastic ele-
ments when changing a wheel
Plastic elements on wheels may be damaged
when removing and repositioning the wheel.
#
Do not raise the wheels by the plastic
elements when removing and reposition-
ing.
#
Slide the wheel to be mounted onto the cen-
tring pin and push it on.
&
W WARNING ARNING Risk of injury from tightening
wheel bolts and nuts
If you tighten the wheel bolts or wheel nuts
when the vehicle is raised, the jack could tip.
#
Only tighten wheel bolts or wheel nuts
when the vehicle is on the ground.
#
Be sure to observe the instructions and safety
notes on "Changing a wheel" (
/
page 401).
#
For safety reasons, only use wheel bolts which
have been approved by Mercedes-Benz and
for the wheel in question.
#
Tighten the wheel bolts evenly in a diagonal
pattern in the order indicated until they are
nger-tight.
#
Unscrew and remove the centring pin.
#
Tighten the last wheel bolt until it is nger-
tight.
#
Lower the vehicle (
/
page 409).
Low Lower ering t ing the v he vehicle ehicle a er a er a wheel c a wheel change hange
RReq equir uirements: ements:
R
The new wheel has been tted (
/
page 408).
* NO NOTE TE Risk of vehicle jack becoming trap-
ped by the AIRMATIC system
If the AIRMATIC system has released air when
raising the vehicle, the jack can become trap-
ped when the vehicle is lowered.
#
Start the drive system. This adapts the
vehicle level.
#
Remove the jack from under the vehicle.
#
TTo low o lower t er the v he vehicle: ehicle: place the ratchet onto
the hexagon nut of the jack so that the letters
"AB" are visible and turn anti-clockwise.
Wheels and tyres 409 409