Mercedes-Benz EQE 350+, Руководство пользователя

Страница: 210 / 541

Combo 1 vehicle socket Combo 2 vehicle socket
#
Open socket ap 1 via the EQ module of the
multimedia system (
/
page 308).
or
#
Press the centre rear section of socket ap
1 .
Socket ap 1 swings open and status display
2 lights up white.
VVehicles wit ehicles with an electr h an electric socke ic sockett ap: ap: if an obsta-
cle impedes the electric socket ap while it is
opening, the socket ap closes again automati-
cally and the driver's display shows a correspond-
ing display message.
% When the vehicle is started (the õ display
is lit in the driver's display), socket ap 1
cannot be opened.
#
Remove socket cover 4 from the lower con-
nection of vehicle socket 3 .
%
The CCS charging cable connector requires
both vehicle socket connections 3 .
#
Insert the charging cable connector into vehi-
cle socket 3 to the stop.
Make sure that the charging cable is not taut
when inserted.
Status display
2 ashes orange and, as soon
as the high-voltage battery is charged, blue.
%
When the charging sequence for the ambient
lighting is activated, the ambient lighting lights
up for approximately 30 seconds as with sta-
tus display 2 (
/
page 153).
Driving and parking 207 207