Mercedes-Benz EQC 350 4MATIC 2021, Руководство пользователя

Страница: 168 / 453

Combo 2 vehicle socket
1
Type 1 or type 2 connection for charging
with alternating current
2 Socket extension for charging with direct
current
% When using a CCS (Combined Charging Sys‐
tem) charging cable to charge with direct
current at a combo vehicle socket, both vehi‐
cle socket connections 1 and 2 are used
for charging.
Charging options for the high-voltage battery
(mode 2, 3 or 4):
R
Charging through recuperation while the
vehicle is in motion
R
Charging with alternating current when sta‐
tionary:
-
At a mains outlet (mode 2)
-
At a wallbox or charging station (mode 3)
R
Charging with direct current when stationary:
-
At a fast charging station (mode 4)
Depending on the country-specific vehicle equip‐
ment and your vehicle's charging cable, single
phase AC charging is also possible.
Observe the different grid requirements of your
current location when charging. Only use charg‐
ing cables which conform to the grid require‐
ments. Consult a qualified electrician or your
local grid operator if you have any questions.
It is recommended that you charge the high-volt‐
age battery at a wallbox or charging station due
to the improved charging performance and bet‐
ter charging efficiency offered.
System limits
The power output of the high-voltage battery
may be impaired by the following:
R
High or low outside temperatures
R
Electrical auxiliary consumers in the vehicle
being switched on, e.g. operating the air con‐
ditioning system
R
Extended periods without charging
The charging time of the high-voltage battery
may be increased by the following:
R
High or low outside temperatures
R
Extended periods without charging
R
The maximum available charge current of the
charging facility
R
The settings of the charging process in the
multimedia system (
/
page 180)
Driving and parking 165